Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

The LF Forklift Licence Assessment, All Drawn From the Data Plate to the Practical, Always in the Same Order

The data plate, the load centre, the stability triangle, the pre-start check and exclusion zones. One topic per page: the drawing first, then what to remember. Written for the Class LF licence in Australia. 65 illustrated pages.

START STUDYING THIS WAY

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEach check and rule drawn, with the explanation beside it
65 illustrated pages8 parts, from the LF licence to assessment day
Up-to-date sourcesModel WHS laws, Safe Work Australia codes of practice and AS 2359
PDF by emailFormat

Look Inside the Book

Every page has one big drawing and a box with the numbers and steps you need to know:

6 labelled parts of a counterbalance forklift, from mast to counterweight
6 labelled parts of a counterbalance forklift, from mast to counterweight
Data plate in 8 lines: capacity in kg always paired with load centre in mm
Data plate in 8 lines: capacity in kg always paired with load centre in mm
Two front wheels + rear axle pivot: the combined centre of gravity must stay inside.
Two front wheels + rear axle pivot: the combined centre of gravity must stay inside.
Example: 4500 mm lift, 600 mm load centre = 1800 kg maximum.
Example: 4500 mm lift, 600 mm load centre = 1800 kg maximum.
Engine on: seatbelt, horn, lights, beacon, reverse alarm, gauges, steering, brakes.
Engine on: seatbelt, horn, lights, beacon, reverse alarm, gauges, steering, brakes.
Exclusion zone: 3 m at walking pace, raised load = height + 3 m (4 m → 7 m).
Exclusion zone: 3 m at walking pace, raised load = height + 3 m (4 m → 7 m).
Plan, pre-start, pick up, travel, place, destack, ramp, park, report.
Plan, pre-start, pick up, travel, place, destack, ramp, park, report.
18, 5 years, 60 days, 500/600 mm, 10%, 5–7 km/h, 3 m.
18, 5 years, 60 days, 500/600 mm, 10%, 5–7 km/h, 3 m.

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 8 parts and 61 topics.

The Problem Isn't You. It's How It Was Explained.

You're on the forklift with a pallet raised and the trainer asks: why is this truck stable right now, and what would tip it? You know it's fine. You just can't say why.

You read the stability section last night. Centre of gravity, rear axle pivot, combined load: all in paragraphs. Three pages of words for something that is really a shape.

Two front wheels + rear axle pivot: the combined centre of gravity must stay inside.

In the book, the stability triangle is one page: the two front wheels and the rear axle pivot drawn as a triangle, with a dot for the combined centre of gravity that shifts as the load goes up, tilts forward or swings round a corner. Dot inside, truck stable.

The same goes for the data plate, the load centre, the load chart, the engine-on checks and exclusion zones: each one has its own drawn page.

You get it, and on the day you explain it and drive it without going back to the manual.

COMPARE FOR YOURSELF

The Same Topic, Two Ways to Study It

THIS
  • The manual: lines and lines of text
  • The data plate explained only in words
  • You walk into the assessment with doubts
The manufacturer's data plate fitted to the powered industrial truck must remain legible at all times and identifies, among other particulars, the model and serial number, the unladen mass, the rated capacity expressed in kilograms at a nominated load centre distance expressed in millimetres, the maximum lift height and any derating applicable where an attachment is fitted. The operator must not exceed the rated capacity, noting that the permissible load decreases as the load centre distance or lift height increases, and must refer to the load chart accordingly.
FOR THIS
  • The data plate in one drawing
  • Capacity and load centre in a box
  • You see it and you get it
Data plate in 8 lines: capacity in kg always paired with load centre in mm
CONTENTS

Take a Look at the 8 Parts and 61 Topics

The LF licence, the machine, stability, the pre-start check, operating and handling loads, site and traffic, refuelling and shutdown, and assessment day: 65 pages, all illustrated

IThe LF Licence · pp. 5-11
  1. What the LF Class Covers
  2. From Training to Licence Card
  3. Who Does What: You, the RTO, the Regulator
  4. Your Duties as an Operator
  5. Codes of Practice and Standards in Plain Words
  6. Licence Rules: Carry It, Renew It
  7. The Hazard–Risk–Control Chain
IIKnow the Machine · pp. 12-19
  1. Parts of a Counterbalance Forklift
  2. The Mast: Simplex, Duplex, Triplex
  3. Forks, Heel and Fork Pins
  4. Chains and Hydraulics
  5. Controls and Gauges
  6. Fuel and Power Types
  7. Reading the Data Plate
  8. Attachments Change the Capacity
IIIStability · pp. 20-27
  1. The Forklift Is a See-saw
  2. The Load Centre
  3. The Stability Triangle
  4. How the Centre of Gravity Moves
  5. Reading a Load Chart Step by Step
  6. Estimating Load Weight
  7. Longitudinal Tip-over
  8. Lateral Tip-over and What to Do
IVPre-start Check · pp. 28-35
  1. Why the Order Matters
  2. Walk-around: Front of the Truck
  3. Walk-around: Sides and Rear
  4. Fluids and Fuel Checks
  5. Operational Checks: Engine On
  6. Hydraulic Function Test
  7. Fault Found: Tag Out and Report
  8. Filling In the Checklist
VOperating and Handling Loads · pp. 36-45
  1. Getting On and Starting Up
  2. Travelling Position
  3. Approaching a Pallet
  4. Picking Up the Load
  5. Placing a Load at Height
  6. Destacking from a Rack
  7. Ramps and Slopes
  8. When You Cannot See Past the Load
  9. Long, Wide and Unusual Loads
  10. Loading Trucks and Containers
VISite, People and Traffic · pp. 46-53
  1. Reading the Traffic Management Plan
  2. Pedestrians and Exclusion Zones
  3. Blind Corners and Doorways
  4. Speed and Surfaces
  5. Overhead Hazards and Power Lines
  6. No Passengers, No Lifting People
  7. Weather and Outdoor Work
  8. Communication and Signals
VIIRefuelling, Charging and Shutdown · pp. 54-58
  1. Changing an LPG Cylinder
  2. Refuelling Diesel or Petrol
  3. Charging an Electric Forklift
  4. Parking and Shutdown
  5. End-of-shift Report
VIIIAssessment Day and Review · pp. 59-65
  1. The Knowledge Assessment
  2. The Practical Assessment
  3. What the Assessor Watches
  4. Load Chart Practice
  5. Numbers to Have at Hand
  6. The Most Common Mistakes
  7. Final Checklist Before the Day

One Page, One Topic, All Clear

Think of it this way:

It's the morning of your practical. The assessor taps the data plate and asks: what can this truck lift with the load centre at 600 mm?

In the book you open the load chart page and see it solved in three steps: lift height first, then load centre, then the limit where they meet, with a worked example beside it.

Engine on: seatbelt, horn, lights, beacon, reverse alarm, gauges, steering, brakes.

Same with the stability triangle, the load chart, the engine-on checks, exclusion zones and the practical in order: each one on its own page.

Forklift Licence Illustrated is 8 parts and 65 illustrated pages, with load chart practice, the numbers to have at hand, the most common mistakes and a final checklist at the end.

What you see drawn, you don't have to memorize.

What's Inside Forklift Licence Illustrated:

Ipp. 5-11

The LF Licence

What Class LF covers, the path from training to licence card, who does what (you, the RTO, the regulator), your duties, codes of practice in plain words and the hazard–risk–control chain.

IIpp. 12-19

Know the Machine

The counterbalance forklift part by part: mast types, forks and heel, chains and hydraulics, controls and gauges, fuel and power types, the data plate and how attachments change capacity.

IIIpp. 20-27

Stability

The see-saw, the load centre, the stability triangle, how the centre of gravity moves, reading a load chart, estimating weight and both kinds of tip-over.

IVpp. 28-35

Pre-start Check

Why the order matters, the walk-around front, sides and rear, fluids and fuel, engine-on checks, the hydraulic test, tagging out a fault and filling in the checklist.

Vpp. 36-45

Operating and Handling Loads

Getting on and starting up, travelling position, approaching and picking up, placing at height, destacking, ramps, blocked vision, long and wide loads, trucks and containers.

VIpp. 46-53

Site, People and Traffic

The traffic management plan, pedestrians and exclusion zones, blind corners, speed and surfaces, overhead hazards, no passengers, weather and signals.

VIIpp. 54-58

Refuelling, Charging and Shutdown

Changing an LPG cylinder, diesel or petrol refuelling, charging an electric forklift, parking and shutdown, and the end-of-shift report.

VIIIpp. 59-65

Assessment Day and Review

The knowledge and practical assessments, what the assessor watches, load chart practice, the numbers to have at hand, the most common mistakes and a final checklist.

At the end of the book: Load chart practice, the numbers to have at hand, the most common mistakes and a final checklist before the day.

Plus: 2 Free Books

Forklift Knowledge Practice Book

BONUS 1: «Forklift Knowledge Practice Book»

Value on its own: US$ 17.90

Exam-style questions with the answer explained, so you can test yourself before the knowledge assessment and see exactly which page to go back to.

Forklift Mistakes: Before and After

BONUS 2: «Forklift Mistakes: Before and After»

Value on its own: US$ 14.90

The 15 most common forklift mistakes drawn side by side with the right way, so you can spot them in your own driving before the practical assessment.

Forklift Licence Illustrated with 2 Free Books

  • Forklift Licence Illustrated: 65 illustrated pagesUS$ 63
  • BONUS 1: Forklift Knowledge Practice BookUS$ 17.90
  • BONUS 2: Forklift Mistakes: Before and AfterUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT FORKLIFT LICENCE ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you Forklift Licence Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You're doing your LF course

You're doing your LF course

Each topic from the RTO course on its own drawn page, so the theory you read at night is still there in the morning.

Your assessment is coming up

Your assessment is coming up

The data plate, the load chart and the practical in the same order every time, plus the practice book to test yourself before the day.

You already drive under supervision

You already drive under supervision

You know how to move a pallet. The book shows the why behind it: load centre, stability and the checks the assessor expects in order.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT FORKLIFT LICENCE ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try Forklift Licence Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I've been around forklifts for years but never sat the LF assessment?

Yes. It doesn't teach you to drive from scratch: it puts the theory and the order of the checks on paper, drawn, so you can explain what you already do.

Where does the content come from?

It's written for Australia, around the model WHS Act and Regulations, the Safe Work Australia codes of practice and guides, AS 2359 and the national unit for the Class LF licence (TLILIC0003). That unit is the same in NSW, VIC, QLD, WA, SA, TAS, the NT and the ACT. Rules that vary by state are marked so you can confirm them with your regulator and your RTO.

Is this official material?

No. It's an independent illustrated study guide, not affiliated with Safe Work Australia, any state regulator or any RTO.

Does it replace the RTO course?

No. The training and both assessments are done by your RTO, and the licence is issued by your state or territory regulator. The book doesn't give you a certificate or a licence: it's for revising and walking in prepared.

Are the practice questions the ones in the assessment?

No. They're written for this book, in the style of the knowledge assessment, so you can check yourself and see which page to go back to.

How does it arrive?

In PDF by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-off payment.

Can I have it on paper?

Yes. It's a PDF you can print at home or at a print shop and keep in your bag or on the truck.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading without anything sticking.

The data plate and the stability triangle, drawn and done.

You walk into the assessment knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT FORKLIFT LICENCE ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.